Lugs Shoes Is The Rear Drum Brake Backing Plate A Separate Part That Can Be Removed Without Removing The Shaft Or Bearing
Is the rear drum brake backing plate a separate part that can be removed without removing the shaft or bearing - lugs shoes
The board does not affect the drum in the back when they put on the flaps and shoes ... the shoe around the bush. Chilton in some confusion for me this time, the shaft and bearings, or what? Any help would be great. The car had an accident and I hope that the mounting plate is all that is wrong instead of the axle shaft.
|
3 comments:
What is the problem? Is it rub? You can remove the tree away from the back to check, you put the wheel and the drum, and in the unity of the market in order to concentrate on the flange of the shaft. Make sure that the trucks put on the media. You can put something was in the vicinity of the flange of the tree planted as a stone or a stick into the ground to see if the difference between increases and decreases or stays the same. If different, how the wave is tilted axis of rotation. Only on the issue, you can remove the pad to answer, but you must remove the axle to remove it. It might be easier to check the tree.
The bracket is different from the shaft or bearing hub axle.
It depends on the type of vehicle in a position to replace them. He bolted usually four holes in the axle and between the flange and the outside of the rear axle.
Post a Comment